Robot vacuum
Model
B101GL
Dimensions
350 x 350 x 97mm
Rated voltage
14.4V⎓
Rated voltage - 1
14.4V - 1
Rated voltage - 2
14.4V - 2
Rated power
70W
Net weight
3.8kg
All-in-one station
Model
JZ2202
Dimensions
423 x 340 x 568mm
Rated input
220–240V ~ 50/60Hz
Rated output
20V ⎓ 2A
Dust collection power
1000W
Drying + Charging power
90W
Cleaning power
55W
Water resistance rating
IPX1
All-in-one station net weight
8.3kg
Package contents
Robot vacuum x1
All-in-one station base x1
(Includes dust bag, clean water tank, dirty water tank, wash plates)
Main brush x1
(Installed)
Brush cover x1
(Installed)
Dust bag x1
(Replacement)
Dustbin x1
(Installed)
Pads x2
(Installed)
Pad plates x2
Side brush x1
Cleaning tool x1
Power cable x1
User manual x1
Sensor list
SensorsUsageEffective Range
Drop sensorUsed to detect steps and dropsRobot will back up when the sensor detects a drop in height against typical media of approximately 85mm (white) or 15mm (black)
Ultrasonic sensorUsed to identify carpet materialWhen the sensor detects a carpet signal, depending on user settings either the suction power is increased, or the mop cloth is raised or positioned to avoid the carpet.
LDS laser sensorUsed in image formationAble to measure object distances in the range of 0.12m–6m
Line laser sensorUsed to detect small obstaclesAble to detect obstacles in the 20–600mm range
AI Visual identification sensorUsed to detect certain obstacles and furniture. No room attribute recognition capabilities.Used to detect object type. Field of view: horizontal 90°, vertical: 75°
Extended edge sensorUsed along the wallUsed to maintain a consistent distance from the wall of 0–1.5cm
IMU SensorRobot vacuum motion status detectionMotion can be detected in the following areas: Acceleration ranges ±2g/±4g/±8g/±16g Gyroscope ranges from ±125°/s to ±200°/s
Drive wheel lift sensorUsed to detect if drive wheel is off the groundDetects if wheel is raised and triggers drive wheel stall if raised in motion
Air pressure sensorTest for dust collection capacity and blocked ductsDetects pressure in the dust channel between 300–1250hPa and alerts user if duct blockage is identified