Remove creases quickly and smooth out wrinkles
Xiaomi Handheld Steam Iron Awards
2023 iF Design Award
2023 Red Dot Award
Steam boost
Quick steam in 30 seconds
Works vertically and horizontally
Iron 7 T-shirts in a row
Multiple ironing modes
Mite and bacteria removal
Continuous steam
Power-off protection
Keep your clothes looking stunning in all seasons
Small size, powerful steam
Micro-pressure technology provides fine steam and bursts. 10 steam holes release steam to soften clothing fibres and smooth out creases.
10 steam holes
Large steam volume
Strong penetration
High-temperature steam
Xiaomi Handheld Steam Iron
Easily penetrate shirts, suits and coats*
Xiaomi Handheld Garment Steamer
Penetrates shirts and suits, but not autumn and winter coats
Steam boost for stubborn creases
30kPa* pressurisation technology can release high-pressure steam instantly to penetrate directly into inner fibre layers, easily smoothing out stubborn creases.
Approximately 50cm*
Spray distance
1200W
Power
*Note: Do not unlock or press the steam boost button during the setup and heating process to avoid scalding from splashing.
Choose different ironing modes for different creases
Dry ironing
Dehumidify, remove wrinkles and shape fabric
Wet ironing
Smooth out ordinary wrinkles
Wet ironing and steam boost
Remove stubborn wrinkles
Iron horizontally or vertically, whatever works for you
For shirts and skirts, use vertical ironing to remove wrinkles quickly. For thick autumn and winter clothing, use horizontal ironing to remove wrinkles and shape clothing.
Iron a shirt in 1 minute*
The large ironing plate removes wrinkles in 1 minute
A large ironing plate with ceramic glaze coating makes ironing a smooth, comfortable, and efficient experience.
8426mm²
New steam iron*
3218mm²
Previous garment steamer
Secondary heating technology takes care of delicate clothing
The secondary heating technology uses fine steam that penetrates deep into clothing fibres, quickly smoothing out wrinkles and ensuring they're ready to wear immediately after ironing. Dual-NTC smart temperature control calibrates temperature in real-time for efficient ironing without damaging clothes.
Note: When ironing silk fabrics, place a soft cloth or towel on the silk to insulate the heat and avoid direct contact with the ironing plate. This prevents damage to the silk. Iron wool and synthetic fabrics inside out to avoid damaging the fabric texture and leaving ironing marks.
User-friendly and considerate design with fast preheating and power-off protection
Quick steam
In 30 seconds
Heats up in 30 seconds and produces steam quickly*, making ironing a breeze. The considerate and thoughtful design only emits steam once heating is complete, to prevent scalding from hot water spray that has not been vaporised.
Large 150mL water tank*
Long-lasting ironing without the need to frequently replenish water
The transparent and detachable water tank is easy to fill, simple to operate and allows the water level to be always visible. Fill just once to iron multiple pieces of clothing.
8 shirts*
7 T-shirts*
2 coats*
*Due to differences in personal usage and thickness of clothing, the number of ironable clothes is for reference only and liable to vary in different usage conditions.
99.99% sterilisation rate*
100% mite removal rate*
High-temperature steam effectively removes bacteria and mites, keeping clothes clean and comfortable at all times.
*Due to differences in personal usage, ironing time and thickness of clothing, sterilisation and mite removal effects are for reference only. Actual effects may vary.
8-minute power-off protection for worry-free ironing
The iron automatically powers off if left idle for more than 8 minutes*. To continue using it, simply pick it up and sensors will pick up the movement and automatically begin reheating.
Keep your fingers free with automatic steam release
The one-touch lock design for the steam button enables continuous and automatic steam release, so there's no need to keep your finger on it.
Improve your well-being with a wonderful ironing experience
V-shaped tip design
Remove the tiniest wrinkles around buttons, on plackets, at trouser creases and on collars.
Indicator
Blinking white: the iron is heating up.
Steady white light: heating is complete and the iron is ready for use.
Insulation base
Place the iron on the base at any time. A groove in the middle collects condensation.
Ironing glove
The perfect ironing and steaming companion
1.9m rubber power cord
Unlimited use.
*Easily penetrates shirts, suits and coats: fill the water tank to the maximum water level and heat the iron at the rated voltage until it reaches a stable temperature. In dry ironing + steam boost mode, the steam boost can penetrate shirts, suits and coats, as tested by the manufacturer. Actual performance may vary due to environmental changes during use. Results are for reference only.
*30kPa pressurisation technology: 30kPa = 0.3bar. The ambient test temperature was 22–25°C. At the rated voltage, the maximum steam boost pressure from the middle hole of the iron was tested to be at 0.3±0.1bar. This was tested by the manufacturer. Actual performance may vary due to environmental changes during use. Results are for reference only.
*Spray distance about 50cm: the ambient test temperature was 22–25°C. The water tank of the iron was filled with water, the plate kept horizontal or vertical, and the steam boost button was pressed once every 5 seconds 20 consecutive times. The maximum and minimum values of each spray distance were recorded and the average value was taken. That is, (maximum value + minimum value)/2 ≥ 50cm. The effect is better when dry ironing mode and steam boost are used together. This was tested by the manufacturer. Actual performance may vary due to environmental changes during use. Results are for reference only.
*Plate area: the plate area of the Xiaomi Handheld Garment Steamer is 3218.16mm², and the plate area of this iron is 8426.05mm². This was tested by the manufacturer and the result is for reference only.
*150mL water tank volume and automatic power-off after 8 minutes: Data tested by the manufacturer.
*A full 150mL water tank supports the ironing of about 7 T-shirts, 8 shirts or 2 coats: fill the water tank to the MAX water level and heat the iron at the rated voltage until it reaches a stable temperature. You can continuously iron 8 shirts, 7 T-shirts or 2 coats. This was tested by the manufacturer. Actual performance may vary due to environmental changes during use. Results are for reference only.
*Heating and quick steam in 30s: Data tested by the manufacturer.
*99.99% sterilisation rate: in a laboratory environment, steam was applied to bacteria for 1 minute at a distance of 1cm. The results showed that this product has a removal rate of up to 99.99% against Staphylococcus aureus, Escherichia coli and Candida albicans. The results are for reference only. Data come from Vkan Certification & Testing Co., Ltd. (CVC), with report number: WTS2024-13514.
*100% mite removal rate: mites were swiped onto a piece of cloth measuring 100mm x 100mm. The iron was turned on in wet ironing mode. After steam was released, the cloth was then vertically ironed at a speed between 3cm/s and 5cm/s for 1 minute. The results showed that this product has a dust mite removal rate of up to 100%. Results are for reference only. Data come from Vkan Certification & Testing Co., Ltd. (CVC), with report number: WTS2024-13520.
*Unless otherwise specified, data on this page come from the manufacturer.
*Product images, structural diagrams and function illustrations on this page are for reference only. Actual product performance may vary slightly. Please refer to the actual product for accurate details.