Mi Smart Space Heater S
More warmth within reach
2200W of power to heat up quickly
Shut off automatically with overheating and tip-over protection
Quiet and comfortable convection heating technology
IPX4 splash-proof*
Accurate digital thermostat with six temperature levels
Smart control using Xiaomi Home app
A warm home for you
Xiaomi Home app remote control
Control the room temperature anytime and anywhere. Use the app to turn the heater on remotely.
Customize to your heating needs with 4 timers and 6 heat settings
18/20/22/24/26/28°
°C
Six temperature settings
1/3/5/9
h
Four timer settings
Find comfort in any moment
Smart temperature control for comfortable environment and power saving
When the surrounding temperature is lower than the preset temperature, it will automatically continue heating; when the surrounding temperature reaches the preset temperature, it will automatically reduce the power or stop heating. With a built-in adjustable thermostat, the heater will keep your home at a comfortable temperature and is more energy-saving than many non-thermostat electric heaters.
Temperature (°C)
Constant temperature setting
Time(min)
Thermostat electric heater
Non-thermostat electric heater
*The figure is a schematic diagram of the principle, not an actual test diagram.
Heats up instantly
No need to wait
Temperature (℃)
2200W high-power
Accelerate to heat up
Time(min)
Mi Smart Space Heater S Heating curve (based on experimental data)*
Two-way heat emission, natural convection
Let the warmth spread in the room
The heated air rises and the cool air comes down producing a convective effect for air circulation and room heating. The wide front and top air ducts allow for heating close areas and the entire room.
Comfortable and quiet
It circulates to form convective hot air, which flows in both directions from the top and sides. The air flow is softer than that of an AC and is not as prone to dryness. It will not interfere with your sleep at night, and will not cause dry eyes and throat in the morning.
Soft breeze
Low dryness
Wide air duct design for faster heating
With an optimized air duct, the temperature rises faster and the warmth quickly spreads throughout the entire home.
Water-resistant protective shell
IPX4 splash-proof*
Overheating protection sensor
Tip-over protection
Overheating protection
Tip-over switch off
Enhanced safety
Child lock equipped
Use a wall socket to reduce the risk of circuit breaker tripping*
Small and flexible body
Integrated drying rack design
With simple and practical body design, the heater is small, flexible and easy-to-move. The integrated drying rack can load 1.5kg dry clothes while heating.
Warm Tips
When using the electric heater, it is recommended to first set the thermostat to maximum temperature, close the doors and windows to warm up the room. Keep the heat from dissipating for 20-30 minutes, and then adjust the temperature according to your preference. The heating effect will be better after the room has been preheated.
Notes on the usable area
Factors such as house height and insulation will affect the heating effect. Self-built buildings with limited insulation, new buildings with high levels of moisture can also affect the heating performance. If your home is situated on the top floor, with limited sunshine exposure, has large glass windows or is located in a cold area, that can also affect the heating process.
Limited sunlight exposure
Cold area
Top floor
Large glass windows
In the above-mentioned situation, it is recommended to use the heater in an area no larger than 10m².
Under optimal circumstances, the heater performance can be used in areas up to 20m².
*If high-power electrical appliances are used at the same time, it may cause the power strip to overload and automatically trip. It is recommended to use a wall socket or a high-power plug-in board. It is not recommended to use it on the same plug-in board with other high-power electrical appliances.
*All data on this page are from Xiaomi Labs unless otherwise specified. Due to environment factors, the test data may differ from the actual product.
*IPX4 splash-proof: Data from China National Radio and Television Product Quality Supervision and Inspection Center. Report No. C-00201-19-2057-S.
*Mi Smart Space Heater S Heating curve (based on experimental data): After 1 hour of operation at 2200W power with an initial temperature of 23°C, the ambient temperature rises by 13.6°C, as tested according to the enterprise product standard. Data from China Testing & Inspection Institute for Household Electric Appliances. Report No. Wrn-19-478.