5-stage composite filtration, install and it's ready for use
4 filters in 1 unit
5-stage composite filtration
Microfiltration for safe water
Natural activated carbon
Effectively remove residual chlorine for healthier washing and cooking
Extended service life
Washable ceramic filter reduces usage costs
3 water modes
Switch freely to handle various scenarios
3-step quick installation
Simple, convenient and compatible with a variety of taps
Matte design
View filter status at a glance
5-stage composite filtration
Microfiltration for safe water
The 5-stage composite filtration system filters water layer by layer and purifies thoroughly, effectively removing sand, rust, insect eggs, colloids, residual chlorine, and organic pollutants*. This ensures great quality filtered, healthy water.
① High-density stainless steel filter mesh
Intercepts large particles of sand and rust
② Diatomaceous ceramic filter
Filters fine sand, rust, insect eggs, and colloids from water
③ Coconut
shell-activated carbon
Effectively filters residual chlorine and organic pollutants from water
④ High-density
non-woven fabric
Intercepts carbon particles to ensure output water is clean
⑤ High-density
stainless steel filter mesh
Regulates water pressure
Washable diatomaceous ceramic filter
Long service life and low-cost
The filtration system utilises an external diatomaceous ceramic filter that can be repeatedly cleaned and scrubbed with sandpaper or a scouring pad, extending its service life. The filter is long-lasting, resistant to clogging, eco-friendly, and cost-saving. 4 filters are included. Each filter can be used for 3 to 6 months*.
Visible filtration effect
Before use
After use
*The lifespan of the filter depends on various factors such as water source quality and total water consumption. It is recommended to replace the filter every 3 to 6 months.
Natural activated carbon
High adsorption efficiency
The interior utilises naturally-sourced coconut shell-activated carbon with a high iodine adsorption value. Deep in the core of the purifier, it effectively adsorbs residual chlorine and other organic pollutants from the water, reducing skin irritation caused by organic pollutants.
3.4L/min* high
water-purifying flow rate
Quick water purification
High-volume water output filtered for immediate use. Enjoy purified water for cooking and making soup instantly.
3.4
L/min
Purification speed
3
seconds
160mL purified water
*It is not recommended to drink water directly from the water purifier.
Three water modes
Adapts to a variety of water usage scenarios with ease
Three water modes: purified water, unpurified water, and spray. Switch between them according to your needs by rotating the knob.
Purified water
for cooking and making soup
Unpurified water
for washing dishes
Spray
for cleaning fruits and vegetables
Matte design
Seeing it brings peace of mind
The matte translucent design allows the filter to be faintly visible and ease your worries while looking good. The filter's condition is always visible, reminding you to replace it regularly for a healthier lifestyle. The snap-rotation assembly and disassembly mechanism makes it easy to replace.
Lightweight design
Compact yet mighty household water purifier
The neat and compact unit boasts an integrated design, saving space and making it suitable for multiple home scenarios.
Kitchen installation
Cook and boil water
Bathroom installation
Wash your face/brush your teeth
3-step quick installation*
Convenient and simple
Step 1
Remove the existing aerator
Step 2
Install the appropriate connector
Step 3
Rotate and tighten the water purifier
User-friendly design
No power requiredNo electricity consumption, no water waste, eco-friendly and durable
ABS shellSmooth surface for easy cleaning
Tips
When using for the first time, rotate the knob to the "purified water" mode and run the tap for 30 minutes. It is recommended to turn the tap off and let it sit for 12 hours to achieve better filtration results.
After that, turn the tap on and run it for another 30 minutes, and the water purifier is ready for use. The filter contains activated carbon. On first use, a small amount of filtered impurities may be discharged, which is a normal phenomenon.
*All other products mentioned on this page need to be purchased separately.
*The TDS value does not represent the filtration efficiency of this product. Common TDS test pens measure the total solid content of all soluble substances in the water. This product mainly filters rust, sand, insect eggs, colloids, residual chlorine, and some organic pollutants from the water.
*3.4L/min: At 0.2MPa pressure under laboratory water conditions, the initial flow rate can reach 3.4L/min. Data is provided by Guangzhou Microbiology Research Institute Group Co., Ltd. Report No.: SZ20241032.
*Organic pollutants: The filterable organic pollutants are volatile phenols, chloroform and carbon tetrachloride.
*3-step quick installation: Refers to when the tap is compatible, and the universal connector is not needed. If the universal connector is required, an additional step is involved. Please refer to the user manual for details.
Five water filter connectors
Compatible with most household taps
Outer Thread specifications for the product's connectors
Outer Thread Adapter (M22-W)
Outer Thread Adapter (M24-W)
Inner Thread specifications for the product's connectors
Inner Thread Adapter (M20-N)
Inner Thread Adapter (M22-N)
Tap water purifier universal connector
Universal connector
Notes:
*It is recommended to prioritise installation using threaded connectors (if the aerator on your tap cannot be removed, please purchase and use an aerator wrench to remove it before installing the purifier).*When using the universal connector, adjust the water pressure using the angle valve if the water pressure in your home is too high. This prevents the product from detaching due to excessive water pressure.*When installing the universal connector, it is recommended to use a screwdriver to apply leverage and tighten the clamp at the end. This prevents the product from detaching due to insufficient tightening.
Compatible tap types for reference
Compatible
Basin tap
Basin tap
Basin tap
Kitchen tap
Kitchen tap
Kitchen tap
Incompatible
Pull-out tap
Non-circular spout tap
Sensor-activated tap
Oval spout tap
Tap spout with a diameter larger than 24mm
Tap height less than 15mm
Spray tap
Note:
*The installation connectors included with the product meet the requirements of most household taps. However, some uncommon taps may not be compatible with the provided connectors (the universal connector is only suitable for taps with a spout diameter of 15–23mm and without an aerator). Using connectors on taps that do not meet the installation conditions may lead to the risk of accidental detachment.