Overview

1.Q：What are the difference between Mi Electric Scooter 1S and Mi Electric Scooter?

A: The main differences are as follows:

1. Improve the safety of the vehicle and add the activation function. After starting the vehicle, it  is required to connect Mi Home App and activated.

2. Only Mi Home APP supports for binding, Segway-Ninebot APP doesn't support.

3. The dashboard is upgraded with four LED lights to visualize the interactive dashboard, and the driving information such as speed and power is clear.

4. The side wall of the front tire is thickened to make it more durable;

5, Charging plug adds magnetic suction design, charging protection is safer.

 

2.Q：How to install Mi Electric Scooter 1S ？

A：First, we need to assemble the scooter. We can operate the assembly according to the instructions as follows:

1. Fix the standpipe of the electric scooter and open the parking bracket,

   2. Install the handlebars on the standpipe，

3. Press the brake line close to the standpipe and use the hexagon wrench in the packing box to lock the screws on both sides,

4. Switch machine test after installation.

3.Q：Package contents

A：Mi Electric Scooter 1S x1,Power adapter x1,Hexagon wrench x1,Extended nozzle adapterX1,Screws x5,Tire x 1,User manual,Important information,Specifications。

 

4.Q：How to boot Mi Electric Scooter 1S？

A：When the machine is in off status, can turn on the electric scooter by pressing the switch briefly, and when the machine is on,can turn off the electric scooter by pressing the switch for more than 3s.

When the machine is on: short press the switch once (turn on/off the indicator light),Short press the switch twice consecutively (switch cycling mode)

 

5.Q：How to fold and carry Mi Electric Scooter 1S？

Fold method：

1. Turn off the electric scooter before folding, support folding finger pulling with hand and open the folding wrench.

2. Hook the two points at the position of buckle.

Carry: To carry the standpipe with one or both hands after folding.

6.Q：How to inflate for Mi Electric Scooter 1S tire？

A：When the scooter tire height drops by 20%-30%, it needs to be inflated. The recommended value of tire pressure after inflation is 50psi. The charging steps are as follows:

1. Screw off the cap of the tire inflation nozzle,

2. Connect and tighten the extension nozzle and tire nozzle，

7.Q：How to charge Mi Electric Scooter 1S ？

A：The charging port is near the front wheel on the left side of the pedal of the car. Open the rubber plug and insert the charging plug. After charging, close the rubber plug.

Charging status: When the electric scooter finishes charged, the LED light on the charger will change from red (during charging) to green (after charging).In addition, the rear light will flash in the state after charging, and the battery level will be displayed on the display panel after starting up, and the horizontal bar will be presented and displayed.

  The charging port location is as follows：

8.Q：How to study to drive Mi Electric Scooter 1S at the first time？

 

There is a safety driving manual in the package of the scooter. Please read the operation manual before driving, and drive according to the relevant contents. Wear helmet, elbow and knee protection.The driving method is as follows:

1. Boot and check the vehicle's light.

2、Stand on the pedal with one foot and push the other foot backward.When the electric scooter is sliding, put your other foot on the pedal. After keeping your feet stable, gently press the accelerator dial (the accelerator will not start until the speed is more than 5km/h).

  3、After the electric scooter stops steady, the throttle automatically shuts off.Repeat step 2 if you need to restart.

4、Release the throttle dial to slow down.Turning on the energy recovery system helps slow down.Squeeze the brake handle firmly to brake abruptly.

5、When turning, the body's center of gravity should be slightly inclined to the direction of turning, and slowly turn the hand handle.

9.Q：Does Mi Electric Scooter 1S have to be activated?

A：It is suggested that after the vehicle is assembled, the scooter can be activated before cycling. Under the activation state of the vehicle, parameters can be set for the scooter.Although the scooter can ride when it is not activated, there will be a constant didi alarm sound. The speed limit will be within 5km/h when riding, and the vehicle cannot be set in the APP.

 

10.Q：Where can I find the screws?

A：After unpacking the new car, the forehead locking screw is placed in the following position:

 

Q&A

1.Q：If the weight is more than 100kg, can I ride Mi Electric scooter 1S?

A: It's just that the weight is higher, the more you need to drive gently, don't speed up and slow down too much.In addition, if you weigh more than 100kg, your ability to climb and overcome obstacles will also decrease. Please do not drive up steep hills or through speed bumps.Please ride carefully if you are tall and heavy.

2.Q：What is the protection level of Mi Electric scooter 1S?Can you ride in rain, snow, hail, fog environment?

A: The protection level reaches IP54. Although the car has a waterproof design, it is not recommended to wade in the water for a long time, as such a long time may cause the motor to enter water and cause faults.In addition, for the sake of the personal safety of users, it is easy to be dangerous in bad weather, so it is not recommended to ride. If you must ride, you need to pay special attention to the road conditions and slow down.

3.Q：Does Mi Electric scooter 1S support free insurance?

A: Mi electric scooter 1S doesn't support complimentary insurance. If you need insurance, you can buy personal safety insurance by yourself.

 

4.Q：  How many riding modes does Mi Electric Scooter 1S have?

A: The Mi Electric Scooter 1S has three cycling modes, standard mode, energy-saving mode and sports mode. Double-click the switch button to switch mode under the boot state.

There are three riding mode indicators on the control panel. The status of the indicators in the three modes is as follows:

Energy-saving mode: ECO indicator is on always, the maximum speed is about 15km/h, throttle output is smoother than normal mode, suitable for beginners to be familiar with cycling.

Standard mode: "D" indicator light is always on, the highest speed is about 20km/h, and the throttle output is stable;

Sport mode: the indicator light of "S" is always on: the highest speed is about 25km/h, with strong power. It is recommended to consider using it after mastering the riding skills.

Note: When the cycling speed exceeds 20km/h, scooters are only suitable for sports venues or competitive venues, and riders must wear adequate protective measures.

5.Q：What are the functions of Mi Electric Scooter 1S control panel?

A: The icons and functions of the scooter control panel are as follows:

1. Speed meter: it is used to display the current driving speed of electric scooter;When the electric scooter fails, the speedometer shows the fault code.

2. Mode display: There are three riding mode indicators on the control panel. When the electric scooter works in the energy saving mode, the ECO indicator will be on long;When the electric scooter works in standard mode, the "D" indicator light is always on;When the electric scooter is working in motion mode, the "S" indicator light is always on.(Energy saving mode: the highest speed is about 15km/h;Standard mode: Maximum speed around 20km/h;Sport mode: the maximum speed is about 25km/h, with strong power. It is recommended to consider using it after mastering cycling skills.)

3. Bluetooth display: The bluetooth icon long bright indicates that the electric scooter has been successfully connected to the mobile device.

4. Lock tip: Determine whether the car is locked through the operation of Mi Home APP.

5. Fault display: The wrench icon flashes to indicate that the scooter is out of order.

6. Battery display: display the remaining battery capacity through 5 bars.Each bar represents about 20 percent of the car's full battery.

7. Power switch: Short press the switch to open the electric scooter; long press the switch for 3s or above to close the electric scooter; in boot state, short press the switch once (to open/close the driving light); continuous short press the switch twice to switch the riding mode.

8. High temperature tip: When the thermometer icon is always on, the battery temperature is not less than 50℃. In this case, the vehicle's acceleration capacity is weakened and it may not be able to be charged.

 

6.Q：How to limit Mi Electric Scooter 1S speed?

A：Mi Electric Scooter 1S doesn't have separate speed option, but you can switch different speed mode, achieve the speed limit demand, under the conditions of boot but did not ride,double click on the switch button can switch mode, there are energy saving mode (ECO light bright long, 15 km/h), the standard model (" D "light is normally on, 20 km/h), sports mode (" S" light is normally on 25 km/h) three cycling mode (switch speed mode is not supported in cycling).

 

7.Q：Is the adapter of Mi Electric Scooter 1S common with Mi Electric Scooter and Mi Electric Scooter Pro?

A: The charging interface is the same, and the adapter can be common.

 

8.Q：What is the brake mode and braking distance of Mi Electric Scooter 1S ?

A: The brake mode of Mi Electric Scooter 1S (disc brake + electric brake)

Front wheel: electronic brake

Rear wheel: The first two thirds of the brake handle is the electronic brake while the one third is the physical brake and the electronic brake simultaneously.The braking distance is 4 meters.

 

9.Q：How will the battery indicator show when Mi Electric Scooter 1S is used?

A: There are five indicator lights on the control panel.Each light represents 20% state of charge.The battery indicator light is normally on and flashing.When the electric quantity of each cell is 10%-20%, the indicator light will always be on;When the battery is less than 10% (the last indicator light is in red flashing state and other indicator light is white).

10.Q：How long can Mi Electric Scooter 1S last after full charge?

A: The Mi Electric Scooter 1S which is fully charged, runs out of its stored battery about 120-180 days after standby.If not charged in time, it is likely to lead to excessive discharge of the battery and damage.This kind of damage is irreparable. There is a smart chip inside the battery to record the charging and discharging of the battery. The damage caused by not charging for a long time will not be able to be recharged and the warranty cannot be enjoyed.

11.Q：Does Mi Electric Scooter 1S have an anti-theft method? If it is lost, can it be recovered through positioning?

A: The Mi Electric Scooter 1S supports the function of locking the vehicle and setting the connection password. However, it is also easy for thieves to carry it away directly, so it can't be truly anti-theft. Moreover, the vehicle does not have GPS function, so it cannot be recovered through positioning.

 

12.Q：What should I do if I forget the Bluetooth connection password of Mi Electric Scooter 1S?

A: If you forget your password, you can try to clear it and reconnect.Clear password method: in the boot state, put the brake handle and finger handle (throttle) to the bottom, and then shut down, restart,the password can be cleared.

 

13.Q：Why does the APP impropts that fail to update the firmware of the scooter?

A: In case of this problem, please ensure that the mobile phone screen is always on during the update, the APP update interface does not quit, and the network is kept open.If that doesn't work, try switching to a different system and device.

 

14.Q：How many status are there of the taillight of Mi Electric Scooter 1S?

A: Mi Electric Scooter 1S has three states:

1. If the driving light is turned on during cycling, the taillight will always be on. Opening method: in Mi Home APP >>Setting>>taillight is always on;

2. When braking during cycling, the taillight will flash quickly;

3. When starting up and charging, the taillight will be in the state of breathing light.

 

15.Q：Will Mi Electric Scooter 1S turn off automatically?

A: If the Mi Electric Scooter 1S is not in the cycling status, it will turn off automatically after 5 minutes, which can reduce power consumption.

 

16.Q: What is the angle range of the front swing of the Mi Electric Scooter 1S?

A: The right and left steering angles of the front of Mi Electric Scooter 1S are 60°. If the front of the scooter swings from the far left to the far right, the swinging angle ranges from 0° to 120°.A limit slot has been added to the bowl set of Mi Electric Scooter 1S, which can avoid the danger caused by users making sharp turns during high-speed riding.

17.Q：How far can the light of Mi Electric Scooter 1S illuminate?

A：The light of Mi Electric Scooter 1S can illuminate 3-5m. It is recommended to turn on the running light when riding at night to avoid accidents during dark riding.

 

APP Raleted

1.Q：Which devices and APP does Mi Electric Scooter 1S support to bind?

A: Mi Electric Scooter 1S supports mobile devices with Android4.3/iOS9.0 or above, only support Mi Home APP to bind to the scooter, and Ninebot APP is not supported.

 

2.Q：How to bind Mi Electric Scooter 1S with Mi Home APP?

A: First, confirm that the mobile phone system and bluetooth version meet the conditions of use, turn on the mobile phone Bluetooth function, directly open and log in the App, and then operate the binding connection.

Binding steps:

Enter Mi Home app->click the add button in the upper right corner-> input device name/select nearby devices/select device from the vehicle, select device ->Mi Electric Scooter 1S-> and operate tand connect according to the prompts.

1. After clicking the scooter, it will prompt you to press the power button of the scooter to pair up;

2. Keep the mobile phone network connection open and get close to the scooter to wait for the matching;

3. After the addition, you can choose the room where the equipment belongs and customize the name of the vehicle;

4. After the naming is completed, you can choose to share the device;

5. After the addition, it will search the vehicle connection again and then enter the vehicle plug-in page;

6. The new vehicle binding needs to be activated. When it is added, there will be a guide video.

Note: When the vehicle is not activated, the vehicle will start with a Didi sound and a speed limit. Parameters of the scooter can be set after activation.

 

3.Q：How to delete Mi Electric Scooter 1S from Mi Home APP?

A: There are three ways to remove the bound vehicle from Mi Home App:

1. Find the scooter on the home page of Mi Home App and long press the device option to quickly select and delete the device,

2. Enter the Mi Electric Scooter 1S vehicle details page, open More -> select delete;

3. The device can also be deleted by revoking authorization in Setting -> legal information.

4.Q：Does Mi Electric Scooter 1S support the lock function?

A: The Mi Electric Scooter 1S supports the lock function. When the locking is started, the car will "drip-drip" alarm, the car will have resistance, and the mobile phone will vibrate to remind (within the effective Bluetooth range). The restriction will be lifted automatically after 6 hours.